News
2025.07.22
The 60V high-voltage reusable electronic fuse FA7660 with reverse current protection function goes on the market
Hsinchu, July 22, 2025 -- Fortune Advanced Technology today launched its 60V high-voltage electronic fuse (eFuse) FA7660 with reverse current protection function
The 60V electronic fuse (eFuse) product series of Fortune Advanced Technology includes the FA7660 which support various functions required for circuit protection in power supply lines. For more information, please refer to “Home > Products > eFuse > 60V eFuse”.
The most significant feature of this IC is that it can be used repeatedly.
Conventional thermal fuses (glass tube fuses and chip-type fuses) protect power line circuits by fusing the built-in alloy parts due to Joule heat when the current exceeds the rated value. However, these thermal fuses have some shortcomings, such as slow fusing time, indefinite breaking current, and the need for replacement work once they are broken. Unlike conventional fuses, electronic fuses have a fast current blocking function, because the built-in MOSFET is quickly turned off when excessive current flows. Based on the above reasons, they will not be destroyed by a single over-current event and can be reset and reused. Therefore, these products can reduce maintenance costs and shorten repair time.
The second feature is that it can also merge various protection functions such as over-voltage protection, over-temperature protection, and short-circuit protection. When over-voltage, severe overheating or unexpected short-circuit occurs, it can immediately cut off the power.
The third feature is that eFuse achieves much simpler circuit designs with fewer components and a smaller PCB board area than discrete components.
The fourth feature is that this eFuse can be used in an ultra-wide power supply input voltage range of 3.0V to 60V, and the absolute maximum ratings of the input/output voltage are up to 63V.
The fifth feature is that the FA7660 is capable of driving continuous high currents up to 3A.
The sixth feature is that the over-current threshold can be set by an external resistor, which is more accurate than a thermal fuse.
The seventh feature is that the overvoltage threshold can be set through an external resistor to prevent excessive voltage from being applied to the load.
The eighth feature is that it provides an open drain output to signal interrupts when over current protection, over voltage protection, short circuit protection, reverse current protection, or over temperature protection is triggered.
The ninth feature is that it provides a reverse current blocking function when the FA7660 is disabled and a reverse current protection function when the FA7660 is enabled. The FA7660 power switch consists of 2 back-to-back connected N-channel MOSFETs. When the power switch is turned off, the back-to-back cascaded body diodes of MOSFETs can prevent current from the output port to the input port. When the switch is turned on, whenever the output voltage exceeds the input voltage by 50mV, the FA7660 will turn off the power path immediately.
Combining the above perfect features, this series of products can provide strong protection for electronic equipment such as Industrial PCs and power sourcing equipment (PSE) with Power over Ethernet (PoE) standards.
This product lineup provides auto-retry type of products, that is, the efuse recovers the circuit by itself. The power switch periodically performs soft start process until the over current protection condition is removed.
Package and availability
The FA7660 is now available through authorized distributors in the DFN3x3-12L package. Full and custom quantity reels are available.
About Fortune Advanced Technology
Fortune Advanced Technology Co., Ltd. was established in 2013 focusing on high-voltage mixed-signal power management solutions. We dedicate to meeting the emerging requirements for lower power consumption at the standby stage.
We have successfully developed the first application-oriented PMIC for TV/Monitor TV/STB applications.
It is a digitally controlled multichannel PMIC capable of achieving total 0.15Watt standby power consumption under 230VAC for the whole TV system, which is at the forefront of the IC design industry. Based on this technology, we have successively developed diverse and competitive products widely used in LCD TV, motherboards/AIO, networked communication devices/STB, notebooks computers, and other fields.
We hope to grow into the best power partner to provide high-efficiency and cost-effective power solutions to our customers. Aware of the adverse effects of global warming, we will continue to strive for energy saving.
Trademarks
All registered trademarks and other trademarks belong to their respective owners.
SOURCE Fortune Advanced Technology
The 60V electronic fuse (eFuse) product series of Fortune Advanced Technology includes the FA7660 which support various functions required for circuit protection in power supply lines. For more information, please refer to “Home > Products > eFuse > 60V eFuse”.
The most significant feature of this IC is that it can be used repeatedly.
Conventional thermal fuses (glass tube fuses and chip-type fuses) protect power line circuits by fusing the built-in alloy parts due to Joule heat when the current exceeds the rated value. However, these thermal fuses have some shortcomings, such as slow fusing time, indefinite breaking current, and the need for replacement work once they are broken. Unlike conventional fuses, electronic fuses have a fast current blocking function, because the built-in MOSFET is quickly turned off when excessive current flows. Based on the above reasons, they will not be destroyed by a single over-current event and can be reset and reused. Therefore, these products can reduce maintenance costs and shorten repair time.
The second feature is that it can also merge various protection functions such as over-voltage protection, over-temperature protection, and short-circuit protection. When over-voltage, severe overheating or unexpected short-circuit occurs, it can immediately cut off the power.
The third feature is that eFuse achieves much simpler circuit designs with fewer components and a smaller PCB board area than discrete components.
The fourth feature is that this eFuse can be used in an ultra-wide power supply input voltage range of 3.0V to 60V, and the absolute maximum ratings of the input/output voltage are up to 63V.
The fifth feature is that the FA7660 is capable of driving continuous high currents up to 3A.
The sixth feature is that the over-current threshold can be set by an external resistor, which is more accurate than a thermal fuse.
The seventh feature is that the overvoltage threshold can be set through an external resistor to prevent excessive voltage from being applied to the load.
The eighth feature is that it provides an open drain output to signal interrupts when over current protection, over voltage protection, short circuit protection, reverse current protection, or over temperature protection is triggered.
The ninth feature is that it provides a reverse current blocking function when the FA7660 is disabled and a reverse current protection function when the FA7660 is enabled. The FA7660 power switch consists of 2 back-to-back connected N-channel MOSFETs. When the power switch is turned off, the back-to-back cascaded body diodes of MOSFETs can prevent current from the output port to the input port. When the switch is turned on, whenever the output voltage exceeds the input voltage by 50mV, the FA7660 will turn off the power path immediately.
Combining the above perfect features, this series of products can provide strong protection for electronic equipment such as Industrial PCs and power sourcing equipment (PSE) with Power over Ethernet (PoE) standards.
This product lineup provides auto-retry type of products, that is, the efuse recovers the circuit by itself. The power switch periodically performs soft start process until the over current protection condition is removed.
Package and availability
The FA7660 is now available through authorized distributors in the DFN3x3-12L package. Full and custom quantity reels are available.
About Fortune Advanced Technology
Fortune Advanced Technology Co., Ltd. was established in 2013 focusing on high-voltage mixed-signal power management solutions. We dedicate to meeting the emerging requirements for lower power consumption at the standby stage.
We have successfully developed the first application-oriented PMIC for TV/Monitor TV/STB applications.
It is a digitally controlled multichannel PMIC capable of achieving total 0.15Watt standby power consumption under 230VAC for the whole TV system, which is at the forefront of the IC design industry. Based on this technology, we have successively developed diverse and competitive products widely used in LCD TV, motherboards/AIO, networked communication devices/STB, notebooks computers, and other fields.
We hope to grow into the best power partner to provide high-efficiency and cost-effective power solutions to our customers. Aware of the adverse effects of global warming, we will continue to strive for energy saving.
Trademarks
All registered trademarks and other trademarks belong to their respective owners.
SOURCE Fortune Advanced Technology