FA2201

The FA2201 is a USB Type-C Downstream Facing Port (DFP) controller with an integrated 3A power switch. The FA2201 monitors the CC lines to determine when a USB device is attached. If an Upstream Facing Port (UFP) device is attached, the FA2201 applies power to VBUS and communicates the selectable VBUS current sourcing capability to the UFP via the pass-through CC line. If the UFP is attached using an electronically marked cable, the FA2201 also applies VCONN power to the cable CC pin. The FA2201 also identifies when Type-C audio or debug accessories are attached.

Features

  • USB Type-C Rev. 1.1 Compliant DFP Controller
  • Connector Attach/Detach Detection
  • STD/1.5A/3A Capability Advertisement via CC line
  • Super Speed Polarity Determination
  • VBUS Application and Discharge
  • VCONN Application to Electronically Marked Cable
  • Audio and Debug Accessory Identification
  • Three Selectable Over Current Threshold
  • True Reverse Current Blocking when Shutdown
  • Reverse Current Protection (RCP) when Enable
  • 28V Absolute Ratings at OUT
  • 5.8V Output Over Voltage Protection (OVP)
  • 1µA (typ.) IAUX When Port Unattached
  • Power Wake Supports Low Power in System Hibernate (S4) and OFF (S5) Power States
  • Port Power Management Enables Power Resource Optimization Across Multi-Ports
  • QFN 4x3mm²-20L Package

Specifications

Part No. Vin1 (V) Vin2 (V) Vaux (V) Ron (mΩ) Output Discharge OTP SCP Reverse Blocking Reverse Current Protection (RCP) OVP VOUT Breakdown Control Type Load Detection Power Wake Port Power Management Audio Accessory ID Debug Accessory ID I/O expander Current Limit Levels
FA2201
4.5~5.5 3.0~5.5 3.0~5.5 35 ◎ 5.8V OVP 28V GPIO via GPIO 3 (1.2A/1.7A/3.4A)